Specifications and details
Rated input | 100W |
Maximum input | 300W |
Impedance | 80Ω |
Minimum resonance frequency | 38Hz |
Reproduced frequencies | 30Hz~4.5kHz |
Output sound pressure | 94dB W/m DC12V input |
Weight | 19.8kg |
Maximum current consumption | 1.4A |
Features
A) Cone paper
Divided vibration is suppressed by impregnating the papermade cone with a special treatment agent to improve strength.
B) Damper
Aramid fiber is used as the base material, and its characteristics provide outstanding durability and straightness, thereby yielding linear vibration amplitude.
C) Special adhesive fastening to dampen resonance
Clear sound quality is provided over the entire range by suppressing cabinet resonance that occurs due to speaker vibration amplitude.
D) Voice coil
Employs edge-wide winding of rectangular wire, different from ordinary round wire. This allows gaps between wires to be minimized, and dramatically improves the utilization rate of magnetic force.
Also, this makes it possible to secure the ideal winding width of voice coil wire, and changes in sound quality are smaller, even with large vibration amplitude.
A high-rigidity special coating that can withstand 500°C is applied to the wire surface, so the coil can withstand large input. Clear sound quality is obtained over the entire range due to minimization of wire distortion that occurs during oscillation.
E) Excitation magnetic circuit
Employs an excitation magnetic circuit. Magnetic circuit parts are fabricated by machining, and this contributes to superior sound quality.
F) Dust cap
A special treatment agent is applied to the metal cap to suppress divided vibration and provide clear sound quality.
Other
① Lead-free solder with silver is used for all solder joints
② All products are produced by hand in Japan, and quality is controlled through 100% measurement.
Specifications and details
Rated input | 50W |
Maximum input | 180W |
Impedance | 8Ω |
Minimum resonance frequency | 48Hz |
Reproduced frequencies | 48Hz~12kHz |
Output sound pressure | 90dB W/m DC12V input |
Weight | 7.5kg |
Maximum current consumption | 1.9A |
Features
A) Cone paper
Divided vibration is suppressed by impregnating the papermade cone with a special treatment agent to improve strength.
B) Damper
Aramid fiber is used as the base material, and its characteristics provide outstanding durability and straightness, thereby yielding linear vibration amplitude.
C) Special adhesive fastening to dampen resonance
Clear sound quality is provided over the entire range by suppressing cabinet resonance that occurs due to speaker vibration amplitude.
D) Voice coil
Employs edge-wide winding of rectangular wire, different from ordinary round wire. This allows gaps between wires to be minimized, and dramatically improves the utilization rate of magnetic force.
Also, this makes it possible to secure the ideal winding width of voice coil wire, and changes in sound quality are smaller, even with large vibration amplitude.
A high-rigidity special coating that can withstand 500°C is applied to the wire surface, so the coil can withstand large input. Clear sound quality is obtained over the entire range due to minimization of wire distortion that occurs during oscillation.
E) Excitation magnetic circuit
Employs an excitation magnetic circuit. Magnetic circuit parts are fabricated by machining, and this contributes to superior sound quality.
F) √ edge
Linear vibration amplitude is achieved by employing a √ shape, using an inner circumference roll with small vibration amplitude, and the entire roll with large vibration amplitude.
Damping material is applied to the back side so that it retains flexibility and edge chatter is suppressed.
G) Dust cap
A special treatment agent is applied to the metal cap to suppress divided vibration and provide clear sound quality.
Other
① Lead-free solder with silver is used for all solder joints
② All products are produced by hand in Japan, and quality is controlled through 100% measurement.
Specifications and details
Rated input | 25W |
Maximum input | 100W |
Impedance | 8Ω |
Minimum resonance frequency | 85Hz |
Reproduced frequencies | 60Hz~18kHz |
Output sound pressure | 90.5dB W/m DC12V input |
Weight | 6.3kg |
Maximum current consumption | 1.9A |
Features
A) Cone paper
Divided vibration is suppressed by impregnating the papermade cone with a special treatment agent to improve strength.
B) Damper
Aramid fiber is used as the base material, and its characteristics provide outstanding durability and straightness, thereby yielding linear vibration amplitude.
C) Special adhesive fastening to dampen resonance
Clear sound quality is provided over the entire range by suppressing cabinet resonance that occurs due to speaker vibration amplitude.
D) Voice coil
Employs edge-wide winding of rectangular wire, different from ordinary round wire. This allows gaps between wires to be minimized, and dramatically improves the utilization rate of magnetic force.
Also, this makes it possible to secure the ideal winding width of voice coil wire, and changes in sound quality are smaller, even with large vibration amplitude.
A high-rigidity special coating that can withstand 500°C is applied to the wire surface, so the coil can withstand large input. Clear sound quality is obtained over the entire range due to minimization of wire distortion that occurs during oscillation.
E) Excitation magnetic circuit
Employs an excitation magnetic circuit. Magnetic circuit parts are fabricated by machining, and this contributes to superior sound quality.
F) √ edge
Linear vibration amplitude is achieved by employing a √ shape, using an inner circumference roll with small vibration amplitude, and the entire roll with large vibration amplitude.
Damping material is applied to the back side so that it retains flexibility and edge chatter is suppressed.
F) Dust cap
A special treatment agent is applied to the metal cap to suppress divided vibration and provide clear sound quality.
Other
① Lead-free solder with silver is used for all solder joints
② All products are produced by hand in Japan, and quality is controlled through 100% measurement.
Specifications and details
Rated input | 50W |
Maximum input | 180W |
Impedance | 8Ω |
Minimum resonance frequency | 920Hz |
Reproduced frequencies | 920Hz~40kHz |
Output sound pressure | 95dB W/m DC12V input |
Weight | 5.3kg |
Maximum current consumption | 0.8A |
Features
A) Dust cap
Titanium material is used to achieve high-fidelity high-range characteristics, and smooth sound quality of metal instruments can be provided by affixing damping material to the back side and suppressing the metal sound of titanium.
B) Cone paper
Strength is increased by impregnating with a special treatment agent to provide high-fidelity high-range characteristics.
C) Damper
Aramid fiber is used as the base material, and its characteristics provide outstanding durability and straightness, thereby yielding linear vibration amplitude.
D) Special adhesive fastening to dampen resonance
Clear sound quality is provided over the entire range by suppressing cabinet resonance that occurs due to speaker vibration amplitude.
E) Excitation magnetic circuit
Employs an excitation magnetic circuit. Magnetic circuit parts are fabricated by machining, and this contributes to superior sound quality.
Other
① Lead-free solder with silver is used for all solder joints
② All products are produced by hand in Japan, and quality is controlled through 100% measurement.
Specifications and details
Rated input | 50W |
Maximum input | 180W |
Impedance | 8Ω |
Minimum resonance frequency | 920Hz |
Reproduced frequencies | 920Hz~40kHz |
Output sound pressure | 95dB W/m DC12V input |
Weight | 5kg |
Maximum current consumption | 0.8A |
Features
A) Dust cap
Titanium material is used to achieve high-fidelity high-range characteristics, and smooth sound quality of metal instruments can be provided by affixing damping material to the back side and suppressing the metal sound of titanium.
B) Cone paper
Strength is increased by impregnating with a special treatment agent to provide high-fidelity high-range characteristics.
C) Damper
Aramid fiber is used as the base material, and its characteristics provide outstanding durability and straightness, thereby yielding linear vibration amplitude.
D) Special adhesive fastening to dampen resonance
Clear sound quality is provided over the entire range by suppressing cabinet resonance that occurs due to speaker vibration amplitude.
E) Excitation magnetic circuit
Employs an excitation magnetic circuit. Magnetic circuit parts are fabricated by machining, and this contributes to superior sound quality.
Other
① Lead-free solder with silver is used for all solder joints
② All products are produced by hand in Japan, and quality is controlled through 100% measurement.
BUSINESS INFORMATION
PRODUCT OVERVIEW
Royal Sangyo Co., Ltd. |
Head Office Factory: Kofu Development Center: |
Business description
Development, design, and manufacturing of speaker units |
Copyright (C) ROYAL SANGYO CO.,LTD. All Right Reserved.